Users Guide

Message Description/Solution
This package is not compatible with the version
of Server Agent on your system. You must
upgrade to Server Administrator
before running this package.
Use an alternative update method from dell.com/support/
manuals.
This update package requires an OpenIPMI driver.
Currently no OpenIPMI driver is installed on
the system.
The DUP you selected cannot be installed because you do not
have the OpenIPMI driver installed on the system.
In order to assist in the <update|install>,
you can download and install a version of the
OpenIPMI driver that meets
the minimum version requirement from
dell.com/
support/manuals. The minimum version required
is <version>.
Download and install the minimum required OpenIPMI driver from
dell.com/support/manuals.
This Update Package requires a newer version of
the OpenIPMI driver than is currently installed
on the system, which is version <version>.
The OpenIPMI driver that is currently installed on the system does
not meet the minimum version requirements of the selected DUP.
Kernel source for the running kernel is not
installed,
and the currently installed OpenIPMI driver RPM
was installed without the kernel source for the
running kernel. In order to install OpenIPMI
driver modules for the running kernel that meet
the minimum version requirement,
you must install kernel source for the running
kernel, and then use DKMS (see man page for
dkms) to install and build OpenIPMI driver
modules for the running kernel. To install
kernel source for the running kernel, install
the <filename> RPM that is applicable to the
running kernel.
Install the kernel source for the running kernel, and then use the
Dynamic Kernel Module Support (DKMS) framework to install and
build the OpenIPMI driver modules for the running kernel.
You must install the kernel source by installing the .rpm le
required by the kernel.
For information on using DKMS, see the man page for DKMS from
linux.dell.com/dkms/manpage.html.
You must reboot the system for the update to
take
effect.
If you shut down or power o the system after performing an
update, you will lose the update.
After performing a BIOS update, do not power o the system.
Reboot the system for the update to take eect.
An Update Package is already running. Wait until
it is complete before proceeding with another
update.
You can run only one DUP at a time.
WARNING: DO NOT STOP THIS PROCESS OR INSTALL
OTHER
DELL PRODUCTS WHILE <BIOS|FRMW> UPDATE IS IN
PROGRESS. THESE ACTIONS MAY CAUSE YOUR SYSTEM
TO BECOME UNSTABLE.
Do not interrupt DUP execution.
Cannot find utilities on the system to execute
package.
The package must have certain utilities to execute.
Make sure the following utilities are in the
path:<path>
The utilities named must be in the path mentioned in the message.
File already exists.
The package is attempting to overwrite an existing le.
Rebuilding package <package_name> to support
kernel
version "kernel.x". This process may take
several minutes to complete...
The DUP application is rebuilding the package to support a
dierent kernel version.
Linux Troubleshooting 27