Users Guide

Messages
For descriptions and solutions to messages that you may receive when running DUPs, see the following table:
Table 5. Update Packages Message Information
Message Description/Solution
This Update Package is not compatible with your
system Your system: <Model Name> System(s)
supported by this package: <Model Name>
Select a compatible DUP, and try the update again.
This Update Package cannot be executed under
the current
operating system.
DUPs supports Linux operating systems and kernels supported by
the -- rebuild option.
This Update Package is not compatible with any
of
the devices detected in your system.
Select a compatible DUP for the device(s) you want to update,
and try again.
The prerequisite software version for this
update
was not found.
Software application name: <name>
Current version:<version>
Required version: <version>
The DUP you selected cannot be installed because a prerequisite
requirement was not met. Install the appropriate prerequisite
software version, and try the update again.
You must use the -f option to continue with the
update in the non‑interactive mode.
The version of this DUP is either older than or the same as the
version installed. To apply the DUP, you must force execution.
The software to be updated was not found.
Install
the following software, and then retry the
update. Software name: <name> Required version:
<version>
The system does not contain the software that matches the DUP.
The version of this Update Package is newer than
the currently installed version. Software
application name: <name>
Package version: <version> Installed version:
<version>
This message conrms the version of the currently installed
software before the update is performed.
(Using the interactive mode) Type Y or N when prompted to
continue.
(Using the CLI) Specify the -f option.
The version of this Update Package is older than
the currently installed version. Software
application name: <name>
Package version: <version> Installed version:
<version>
The DUP you selected cannot be installed because a newer
version of the software already exists on the system. To install the
older version:
(Using the interactive mode) Type Y or N when prompted to
continue.
(Using the CLI) Specify the -f option.
The version of this Update Package is the same
as the currently installed version. <version>
Software application name:
<name> Package version: <version> Installed
version: <version>
The DUP you selected cannot be installed because the same
version of the software already exists on the system.
(Using the interactive mode) Type Y or N when prompted to
continue.
(Using the CLI) Specify the -f option.
26 Linux Troubleshooting