Users Guide

Message Description/Solution
Rebuilding Package Failed - RPM Installation
failed
with error code=<RPM Install Error Return
code>
Provides the RPM error code that prevented the package
from being rebuilt.
packagename.bin: Rebuilding Package failed -
Unable
to extract package contents.
Make sure that there is enough space in the /tmp directory.
packagename.bin: Rebuilding Package - Kernel
<kernel-version> is already supported by
this package.
You do not have to rebuild this package because you have
already customized the package for the kernel. You will only
receive this message if you have previously used the --rebuild
option and then ran the rebuilt package.
packagename.bin: Rebuilding Package Failed -
RPM Installation failed with error
code=<LSB_Compliant RPM Install Error Return
code>
Check the LSB Compliant RPM error return codes to
determine the exact reason for failure.
packagename.bin: Rebuilding Package Failed -
Error creating driver support directory.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package Failed -
Error
copying kernel modules.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package Failed -
Error recreating archive.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package Failed -
Uninstall
of driver was unsuccessful.
The driver could not be uninstalled.
packagename.bin: Rebuilding Package Failed -
Error creating files.
Make sure that enough space is available in the /tmp
directory.
Package has been rebuilt successfully.
Output package:
packagename.bin:--CUSTOM.
Package is ready for distribution and execution on production
systems with the same running kernel as the system on which
it was rebuilt.
Package has been rebuilt successfully.
Package is ready for distribution and execution on production
systems with the same running kernel as the system on which
it was rebuilt.
packagename.bin: Rebuilding Package failed -
Unable to extract package contents.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package failed -
Server Administrator is installed on the
system.
Packages cannot be rebuilt on a system that has Server
Administrator installed. Uninstall Server Administrator from the
system before using the ‑‑rebuild option.
The installed operating system version is
not supported by this Update Package. To
customize this package, see "Rebuilding
Packages" in the Update Package User’s
Guide.In no event shall Dell Inc. be held
liable for any direct, indirect, incidental,
special, or consequential damages suffered
during or after package customization and
execution.
The prerequisites for rebuilding the package are present on the
system, Dell is not responsible for any problems that may occur
if you apply customized packages to the system.
In no event shall Dell Inc. be held liable
for any direct, indirect, incidental,
Fully consider this statement before executing a customized
package that was enabled by the ‑‑rebuild option.
27