DELL UPDATE PACKAGES FOR MICROSOFT WINDOWS Version 16.06.
Release Type and Definition This Readme contains updated information for your "Dell Update Packages for Microsoft Windows Operating Systems User's Guide" and any other technical documentation included with the Dell Update Packages for Windows operating systems. Version 16.06.00 Release Date: October, 2016 Previous Version 15.06.201 Importance Recommended It is recommended that you apply this update during your next scheduled update cycle.
Broadcom Network Adapter driver Intel Network Adapter driver QLogic Network Adapter driver QLogic NXII Adapter Emulex Network Adapter driver Power Supply firmware Broadcom Network Adapter Firmware Intel Network Adapter Firmware QLogic Network Adapter Firmware Emulex Network Adpater Firmware Mellanox Network Adapter Firmware iSM Chipset RSTe Driver for 13G platforms What is Supported The Update Packages support Dell systems running the following Windows operating systems:
DRAC firmware DRAC 5, iDRAC6, iDRAC7, iDRAC8 BMC firmware BMC Hard Drives, Micron SSD and NVMe-SSD SCSI BP firmware BP SAS BP, SEP firmware BP Storage enclosure PowerVault MD1000, PowerVault MD1120, PowerVault MD1200, PowerVault MD1220, PowerVault MD3000, PowerVault MD1400, PowerVault MD1420 STASH FD332 RAID Firmware and drivers PERC H200, PERC S300 Adapter, PERC 5/E, PERC 5/i, SAS 5/i, SAS 5/iR Adapter, SAS 5/E, SAS 5/iR, SAS 6/iR, SAS 6/iR Adapter, PERC 6/E, PERC 6/i, PERC 6/i Adapter, CERC6/i P
QLogic Network family of adapters Emulex Network family of adapters Mellanox Network Adapter Mellanox ConnectX-3 Dual Port 10 GbE DA/SFP + Ethernet Adapter.
The DUP update process involves several resets to the USB bus which cause all USB devices to be enumerated again by the Operating System. If you insert the USB device for the first time and if you are prompted with the “Scan and Fix” process, select it to avoid multiple “Scan and Fix” messages each time the USB bus reset happens. Dell Update Packages do not require new refreshes of existing DUPs to be reinstalled since the firmware or driver payload does not change when the DUP is refreshed.
BIOS update is not supported on PowerEdge R210 with BIOS version 1.0.33, 1.2.1, or 1.1.4 installed. BIOS versions earlier than 1.3.4 do not support the online update method used by the DUP process on the PowerEdge R210 under Window Server 2008R2. To update BIOS from one of the versions listed, use the offline BIOS update. Once version 1.3.4 of BIOS is installed, all future BIOS will be supported. BIOS update is not supported on PowerEdge T310 with BIOS version 1.0.2, 1.1.6, or 1.2.1 installed.
Only devices connected to a PERC SAS controller can be updated at this time. This includes PERC5, PERC6, H200, H310, H710P, H810, H710, H700, H800, SAS5 and SAS6 controllers. Do not run storage controller update packages if the controller is in use by other applications. The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (consistency check, background initialization, rebuild, or reconstruction).
Contacting Dell * NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Visit www.dell.com/support 2. Select your support category. 3. If you are not a U.
