Users Guide

Table 5. Update Packages Message Information
Message Description/Solution
This Update Package is not compatible
with your
system Your system: <Model Name>
System(s) supported by this package:
<Model Name>
Select a compatible DUP, and try the update
again.
This Update Package cannot be executed
under the current
operating system.
DUPs supports Linux operating systems and
kernels supported by the -- rebuild option.
This Update Package is not compatible
with any of
the devices detected in your system.
Select a compatible DUP for the device(s) you
want to update, and try again.
The prerequisite software version for
this update
was not found.
Software application name: <name>
Current version:<version>
Required version: <version>
The DUP you selected cannot be installed
because a prerequisite requirement was not met.
Install the appropriate prerequisite software
version, and try the update again.
You must use the -f option to continue
with the
update in the non‑interactive mode.
The version of this DUP is either older than or the
same as the version installed. To apply the DUP,
you must force execution.
The software to be updated was not
found. Install
the following software, and then retry
the update. Software name: <name>
Required version: <version>
The system does not contain the software that
matches the DUP.
The version of this Update Package is
newer than
the currently installed version.
Software application name: <name>
Package version: <version> Installed
version: <version>
This message confirms the version of the
currently installed software before the update is
performed.
(Using the interactive mode) Type Y or N when
prompted to continue.
(Using the CLI) Specify the -f option.
The version of this Update Package is
older than
the currently installed version.
Software application name: <name>
Package version: <version> Installed
version: <version>
The DUP you selected cannot be installed
because a newer version of the software already
exists on the system. To install the older version:
(Using the interactive mode) Type Y or N when
prompted to continue.
(Using the CLI) Specify the -f option.
The version of this Update Package is
the same
as the currently installed version.
<version> Software application name:
<name> Package version: <version>
Installed version: <version>
The DUP you selected cannot be installed
because the same version of the software already
exists on the system.
(Using the interactive mode) Type Y or N when
prompted to continue.
28