Users Guide

Message Description/Solution
In no event shall Dell Inc. be held
liable for any direct, indirect,
incidental, special, or consequential
damages suffered during or after
package customization and execution.
Fully consider this statement before executing a
customized package that was enabled by the
‑‑rebuild option.
Attempt to update BIOS or firmware to
the same
version. Update was unnecessary and
not applied.
Re-application of BIOS or firmware DUP serves
no purpose.
Inventory operation exceeded specified
timeout.
Inventory operations have time-out limits as
defined in the package’s PIEConfig.xml file.
Time‑out durations are in seconds. If an operation
times out, the remainder of the package update is
cancelled.
Execution operation exceeded specified
timeout.
Execution update operations have time‑out limits
as defined in the package. Time-out durations are
in seconds. If an operation times out,
the remainder of the package update is cancelled.
/var/lock directory must exist.
Create this system directory to make sure that
package updates do not execute concurrently.
Unable to build a device driver for
the running
kernel because it is not supported on
your system.
Select a compatible DUP and try again.
The Intel IMB driver is currently
loaded. Please unload
the driver before executing.
Unload the Intel IMB driver before installing the
selected DUP.
Warning: The shell less command is not
available.
When viewing Release Notes, press
space to continue viewing notes, q to
continue DUP processing.
Continue to view the release notes, or install the
less command from operating system media, and
re-execute the package interactively.
Press 'q' to exit DUP
(--version).
Press 'q' to continue with DUP
execution (dup dup execution).
The Linux DUP framework uses the Linux utility,
less, to display the release notes relevant to the
specific firmware or driver release managed by
the DUP. When viewing release notes, DUP
prompts when executed with the below options:
--version: Press 'q' to exit DUP (--
version)
All other DUP execution: Press 'q' to continue
with DUP execution.
Warning: Screen widths of less than
<numeric value> can distort the
information view.
To optionally correct this, answer < No > to stop
package execution. Increase the width of the
terminal window to the required size and then re-
execute the package interactively.
33