Users Guide

Table 5. Update Packages Message Information
Message Description/Solution
incidental, special, or consequential
damages suffered during or after package
customization and execution.
In no event shall Dell Inc. be held liable
for any direct, indirect, incidental,
special, or consequential damages suffered
during or after package customization and
execution.
Fully consider this statement before executing a customized
package that was enabled by the ‑‑rebuild option.
Attempt to update BIOS or firmware to the
same
version. Update was unnecessary and not
applied.
Re-application of BIOS or firmware DUP serves no purpose.
Inventory operation exceeded specified
timeout.
Inventory operations have time-out limits as defined in the
package’s PIEConfig.xml file. Time‑out durations are in
seconds. If an operation times out, the remainder of the
package update is cancelled.
Execution operation exceeded specified
timeout.
Execution update operations have time‑out limits as defined
in the package. Time-out durations are in seconds. If an
operation times out, the remainder of the package update
is cancelled.
/var/lock directory must exist.
Create this system directory to make sure that package
updates do not execute concurrently.
Unable to build a device driver for the
running
kernel because it is not supported on your
system.
Select a compatible DUP and try again.
The Intel IMB driver is currently loaded.
Please unload
the driver before executing.
Unload the Intel IMB driver before installing the selected
DUP.
Warning: The shell less command is not
available.
When viewing Release Notes, press space
to continue viewing notes, q to continue
DUP processing.
Continue to view the release notes, or install the less
command from operating system media, and re-execute the
package interactively.
Press 'q' to exit DUP
(--version).
Press 'q' to continue with DUP execution
(dup dup execution).
The Linux DUP framework uses the Linux utility, less, to
display the release notes relevant to the specific firmware
or driver release managed by the DUP. When viewing release
notes, DUP prompts when executed with the below options:
--version: Press 'q' to exit DUP (--
version)
All other DUP execution: Press 'q' to continue with DUP
execution.
Warning: Screen widths of less than
<numeric value> can distort the
information view.
To optionally correct this, answer < No > to stop package
execution. Increase the width of the terminal window to the
required size and then re-execute the package interactively.
Linux Troubleshooting 31