Users Guide

Table 5. Update Packages Message Information (continued)
Message Description/Solution
packagename.bin: Rebuilding Package failed
- Unable
to extract package contents.
Make sure that there is enough space in the /tmp directory.
packagename.bin: Rebuilding Package -
Kernel <kernel-version> is already
supported by this package.
You do not have to rebuild this package because you have
already customized the package for the kernel. You will
only receive this message if you have previously used the
--rebuild option and then ran the rebuilt package.
packagename.bin: Rebuilding Package Failed
- RPM Installation failed with error
code=<LSB_Compliant RPM Install Error
Return code>
Check the LSB Compliant RPM error return codes to
determine the exact reason for failure.
packagename.bin: Rebuilding Package Failed
- Error creating driver support directory.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package Failed
- Error
copying kernel modules.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package Failed
- Error recreating archive.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package Failed
- Uninstall
of driver was unsuccessful.
The driver could not be uninstalled.
packagename.bin: Rebuilding Package Failed
- Error creating files.
Make sure that enough space is available in the /tmp
directory.
Package has been rebuilt successfully.
Output package:
packagename.bin:--CUSTOM.
Package is ready for distribution and execution on production
systems with the same running kernel as the system on
which it was rebuilt.
Package has been rebuilt successfully.
Package is ready for distribution and execution on production
systems with the same running kernel as the system on
which it was rebuilt.
packagename.bin: Rebuilding Package failed
- Unable to extract package contents.
Make sure that enough space is available in the /tmp
directory.
packagename.bin: Rebuilding Package failed
- Server Administrator is installed on the
system.
Packages cannot be rebuilt on a system that has Server
Administrator installed. Uninstall Server Administrator from
the system before using the ‑‑rebuild option.
The installed operating system version is
not supported by this Update Package. To
customize this package, see "Rebuilding
Packages" in the Update Package User’s
Guide.In no event shall Dell Inc. be
held liable for any direct, indirect,
The prerequisites for rebuilding the package are present on
the system, Dell is not responsible for any problems that may
occur if you apply customized packages to the system.
30 Linux Troubleshooting