Specifications

Cisco UCS C240 M4 High-Density Rack Server (Small Form Factor Disk Drive Model)
SUPPLEMENTAL MATERIAL
77
Adding an Additional CPU (with CPU heat sink)
All Cisco UCS two CPU socket-capable servers can be upgraded from having one to having two CPUs
configured. You will need to order and install a heat sink when adding any additional CPU to a server.
Instructions for installing the new CPU and heat sink can be found at the following link:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4.html
See the section titled “Replacing CPUs and Heatsinks.”
Motherboard Lithium Battery
You can order a replacement motherboard battery. Installation instructions are found at this link:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4.html
See the section titled “Replacing the Motherboard RTC Battery.”
Thermal Grease (with syringe applicator) for CPU to Heatsink Seal
Thermal grease must be applied to the top of the CPU where it comes in contact with the heat sink.
Instructions for applying thermal grease are found at:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4.html
See the section titled “Replacing CPUs and Heatsinks.”
UCS-CPU-GREASE3=
M4 Server CPU thermal grease syringe - needed for heatsink seal
3
UCSX-HSCK=
UCS Processor Heat Sink Cleaning Kit (when replacing a CPU)
3
UCSC-MRAID-SC= SuperCap for Cisco 12G SAS Modular RAID, including all cables.
Notes . . .
1. This part is included/configured with your UCS server (in some cases, as determined by the configuration of
your server).
2. This SD card is blank.
3. This part should be ordered with the purchase of each optional or spare Intel Xeon E5-2600 v3 CPU processor
kit
Table 42 Upgrade and Servicing-related Parts for UCS C240 M4 SFF Server
Spare Product ID (PID) Description