Users Guide

48 | Bruke skjermen
Det vises en melding når en kabel som støtter DP-alternativmodus er koblet til
skjermen under følgende forhold:
• Når Automatisk valg for USB-Cer satt til Prompt for Multiple Inputs.
• Når en DP-kabel er koblet til skjermen.
Dell UltraSharp 43 Monitor
Switch to USB-C Video Input:
No
Yes
U4320Q
Hvis USB-C Charging (USB-C-lading) 90W er satt til Off During Power Off
(Av i avslått modus):
• Når du setter skjermelementer USB-C Prioritization (USB-C-prioritering) til
High Resolution (Høy oppløsning) i Skjerm-funksjonen, vises følgende melding:
Dell UltraSharp 43 Monitor
U4320Q
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
• Når du setter skjermelementer USB-C Prioritization (USB-C-prioritering)
til High Data Speed (Høy datahastighet) i Skjerm-funksjonen, vises følgende
melding:
Dell UltraSharp 43 Monitor
U4320Q
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No