Users Guide

Betjening af skærmen | 51
Hvis USB-C Charging
90 W (USB-C-opladning 90 W) sættes på On
During Power Off (Til, når slukket), og USB-C Prioritization (Prioritering af
USB-C) sættes på High Data Speed (Høj datahastighed), skal du vælge Factory
Reset (Fabriksnulstilling) i Other (Andet), hvorefter følgende besked vises:
Dell UltraSharp 43 Monitor
Are you sure you want to reset to default settings?
Yes No
U4320Q
Hvis du vælger ‘Yes (Ja)‘ til, at nulstille standardindstillingerne, vises følgende
besked:
Dell UltraSharp 43 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U4320Q
When ‘Yes’ is selected, power consumption may increase.
When ‘No’ is selected, It will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Hvis du vælger ‘No‘ (Nej), og laver den anden Factory Reset (Fabriksnulstilling),
vises følgende besked:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?