Users Guide

50 | Betjening af skærmen
Hvis USB-C Charging 90 W (USB-C-opladning 90 W) sættes på On
During Power Off (Til, når slukket), og du sætter et af punkterne i USB-C
Prioritization (Prioritering af USB-C) på High Resolution (Høj opløsning) eller
High Data Speed (Høj datahastighed) i Display (Visning), vises følgende besked:
Dell UltraSharp 43 Monitor
U4320Q
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold key on USB Type-C input for 8 seconds.
Hvis USB-C Charging 90W (USB-C-opladning 90W) sættes på Off
During Power Off (Fra, når slukket) og USB-C Prioritization (Prioritering af
USB-C) sættes på High Data Speed (Høj datahastighed):
• Når du vælger punktet Factory Reset (Fabriksnulstilling) under Other Feature
(Andre funktioner), vises følgende besked:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
• Når du vælger punktet Display Reset (Skærmnulstilling) under Display (Visning),
vises følgende besked:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?