Users Guide

Upotreba monitora | 49
Kada je USB-C Charging (Punjenje preko USB-C) 90W podešeno na On During
Power Off (Uključeno tokom isključivanja) i USB-C Prioritization (Određivanje prioriteta
USB-C) podešeno na High Data Speed (Visoka brzina prenosa podataka), kada izaberite
stavke prikaza na ekranu za Factory Reset (Ponovno postavljanje na fabričke vrednosti) u
okviru funkcije Other (Ostalo), pojaviće se sledeća poruka:
Dell UltraSharp 43 Monitor
Are you sure you want to reset to default settings?
Yes No
U4320Q
Kada izaberete „Da“ za ponovno postavljanje na podrazumevana podešavanja, pojaviće se
sledeća poruka:
Dell UltraSharp 43 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U4320Q
When ‘Yes’ is selected, power consumption may increase.
When ‘No’ is selected, It will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Kada izaberete „Ne“ , uradite drugi Factory Reset (Ponovno postavljanje na fabričke
vrednosti), pojaviće se sledeća poruka:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?