Users Guide

Mengoperasikan Monitor | 49
Jika USB-C Charging (Pengisian Daya USB-C) 90W diatur ke On During Power Off
(Aktif Selama Daya Mati), saat Anda memilih item OSDUSB-C Prioritization (Prioritas
USB-C) ke High Resolution (Resolusi Tinggi) atau High Data Speed (Kecepatan Data
Tinggi) di fitur Layar, pesan berikut ini akan ditampilkan:
Dell UltraSharp 43 Monitor
U4320Q
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold key on USB Type-C input for 8 seconds.
Saat USB-C Charging (Pengisian Daya USB-C) 90W diatur ke Off During Power Off
(Nonaktif Selama Daya Mati) dan USB-C Prioritization (Prioritas USB-C diatur ke High
Data Speed (Kecepatan Data Tinggi):
• Pilih item OSD Factory Reset (Reset Pabrik) dalam fitur Lainnya, pesan berikut akan
ditampilkan:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
• Bila Anda memilih item Display Reset (Reset Layar) di fitur Layar, pesan berikut akan
ditampilkan:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?