Users Guide

48 | Mengoperasikan Monitor
Pesan ditampilkan meskipun kabel yang mendukung mode alternatif DP disambungkan ke
monitor dengan kondisi berikut:
• Bila Auto Select for USB-C (Pilih Otomatis untuk USB-C) diatur ke Prompt for
Multiple Inputs (Tanya untuk Banyak Input).
• Bila kabel DP tersambung ke monitor.
Dell UltraSharp 43 Monitor
Switch to USB-C Video Input:
No
Yes
U4320Q
Jika USB-C Charging (Pengisian Daya USB-C) 90W diatur ke Off During Power Off
(Nonaktif Selama Daya Mati):
• Saat Anda memilih item OSD USB-C Prioritization (Prioritas USB-C) ke High
Resolution (Resolusi Tinggi) di fitur Layar, pesan berikut ini akan ditampilkan:
Dell UltraSharp 43 Monitor
U4320Q
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
• Saat Anda memilih item OSD USB-C Prioritization (Prioritas USB-C) ke High Data
Speed (Data Kecepatan Tinggi) di fitur Layar, pesan berikut ini akan ditampilkan:
Dell UltraSharp 43 Monitor
U4320Q
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No