Users Guide

Rad s monitorom | 47
Prikazuje se poruka dok je kabel koji podržava alternativni način povezan s monitorom u
sljedećim uvjetima:
• Ako je Prompt for Multiple Inputs (Upit za više ulaza) odzivnika Auto Select for
USB-C (Automatski odabir za USB-C).
• Provjerite je li USB kabel čvrsto priključen na monitor.
Dell UltraSharp 43 Monitor
Switch to USB-C Video Input:
No
Yes
U4320Q
Ako je USB-C punjenje (USB-C Charging) 90 W postavljeno na Off During Power Off
(Isključeno tijekom isključenog napajanja) :
• Ako odaberete stavke zaslonskog izbornika USB-C Prioritization (Prioritizacija USB-C)
na High Resolution (Visoka razlučivost) u značajki zaslona, prikazat će se sljedeća
poruka:
Dell UltraSharp 43 Monitor
U4320Q
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
• Ako odaberete stavke zaslonskog izbornika USB-C Prioritization (Prioritizacija USB-C)
na High Data Speed (Visoka brzina podataka) u značajki zaslona, prikazat će se sljedeća
poruka:
Dell UltraSharp 43 Monitor
U4320Q
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No