Users Guide

48 | Upotreba monitora
Ako je USB-C Charging (Punjenje preko USB-C) 90W podešeno na On During Power
Off (Uključeno tokom isključivanja), kada izaberete stavku prikaza na ekranu za USB-C
Prioritization (Određivanje prioriteta za USB-C) na High Resolution (Visoka rezolucija)
ili High Data Speed (Visoka brzina prenosa podataka) u funkciji Display (Prikaz) pojaviće
se sledeća poruka:
Dell UltraSharp 43 Monitor
U4320Q
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold key on USB Type-C input for 8 seconds.
Kada je USB-C Charging (Punjenje preko USB-C) 90W podešeno na Off During
Power Off (Isključeno tokom isključivanja) i USB-C Prioritization (Određivanje
prioriteta za USB-C) je podešeno na High Data Speed (Visoka brzina prenosa podataka):
•Kada izaberete stavke prikaza na ekranu za Factory Reset (Ponovno postavljanje na
fabričke vrednosti) u okviru funkcije Other (Ostalo), pojaviće se sledeća poruka:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
•KadaizaberetestavkeprikazanaekranuzaDisplayReset(Ponovnopostavljanjeprikaza)u
okviru funkcije Display (Prikaz), pojaviće se sledeća poruka:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?