Users Guide

50 | Mengoperasikan Monitor
Saat USB-C Charging (Pengisian Daya USB-C) 90W diatur ke On During Power Off
(Aktif Selama Daya Mati) and USB-C Prioritization diatur ke High Data Speed (Kecepatan
Data Tinggi), pilih item OSD Factory Reset di fitur lainnya, peran berikut akan ditampilkan:
Dell UltraSharp 43 Monitor
Are you sure you want to reset to default settings?
Yes No
U4320Q
Bila Anda memilih ‘Ya‘ untuk mengatur ulang pengaturan default, pesan berikut akan
ditampilkan:
Dell UltraSharp 43 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U4320Q
When ‘Yes’ is selected, power consumption may increase.
When ‘No’ is selected, It will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Saat Anda memilih ‘Tidak‘ , lalu melakukan Factory Reset (Setelan Pabrik) untuk kedua
kalinya, pesan berikut ini akan ditampilkan:
Dell UltraSharp 43 Monitor
U4320Q
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Lihat Penyelesaian Masalah untuk informasi selengkapnya.