Users Guide
52 | Rad sa monitorom
Poruka je prikazana dok je kabl koji podržava naizmenični režim DP-a povezan sa
monitorom pod sledećim uslovima:
• Kada je Automatski izbor za USB-C podešen na Pitaj za više ulaza.
• Kada je DP kabl povezan sa monitorom.
Dell UltraSharp 24/27 Monitor
Switch to USB-C Video Input:
No
Yes
U2421HE/U2721DE
Ako je USB-C Charging (Punjenje preko USB-C) podešeno na Off During Power Off
(Isključeno tokom isključivanja):
•KadaizaberetestavkeprikazanaekranuzaUSB-C Prioritization (Određivanje
prioriteta USB-C) na High Resolution (Visoka rezolucija) u funkciji Display (Prikaz)
pojaviće se sledeća poruka:
Dell UltraSharp 27 Monitor
U2721DE
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
•KadaizaberetestavkeprikazanaekranuzaUSB-C Prioritization (Određivanje
prioriteta USB-C) na High Data Speed (Visoka brzina prenosa podataka) u funkciji
Display (Prikaz) pojaviće se sledeća poruka:
Dell UltraSharp 27 Monitor
U2721DE
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No