Users Guide

54 | Mengoperasikan Monitor
Jika USB-C Charging (Pengisian Daya USB-C) diatur ke On During Power Off (Aktif
Selama Daya Mati), saat Anda memilih item OSD USB-C Prioritization (Prioritas USB-C)
ke High Resolution (Resolusi Tinggi) atau High Data Speed (Kecepatan Data Tinggi) di
fitur Layar, pesan berikut ini akan ditampilkan:
Dell UltraSharp 27 Monitor
U2721DE
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold key on USB Type-C input for 8 seconds.
Saat USB-C Charging (Pengisian Daya USB-C) diatur ke Off During Power Off (Nonaktif
Selama Daya Mati) dan USB-C Prioritization (Prioritas USB-C diatur ke High Data
Speed (Kecepatan Data Tinggi):
•PilihitemOSDFactoryReset(ResetPabrik)dalamfiturLainnya,pesanberikutakan
ditampilkan:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
•BilaAndamemilihitemDisplayReset(ResetLayar)difiturLayar,pesanberikutakan
ditampilkan:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?