Users Guide
Mengoperasikan Monitor | 53
Pesan yang ditampilkan sewaktu kabel yang mendukung mode alternatif DP tersambung
ke monitor dalam kondisi berikut:
• Saat Pilih Otomatis pada USB Tipe C diatur ke Sarankan untuk Beberapa Input.
• Saat kabel DP tersambung ke monitor.
Dell UltraSharp 24/27 Monitor
Switch to USB-C Video Input:
No
Yes
U2421HE/U2721DE
Jika USB-C Charging (Pengisian Daya USB-C) diatur ke Off During Power Off (Nonaktif
Selama Daya Mati):
•SaatAndamemilihitemOSDUSB-C Prioritization (Prioritas USB-C) ke High
Resolution (Resolusi Tinggi) di fitur Layar, pesan berikut ini akan ditampilkan:
Dell UltraSharp 27 Monitor
U2721DE
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
•SaatAndamemilihitemOSD USB-C Prioritization (Prioritas USB-C) ke High Data
Speed (Data Kecepatan Tinggi) di fitur Layar, pesan berikut ini akan ditampilkan:
Dell UltraSharp 27 Monitor
U2721DE
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No