Users Guide

52 | Bruke skjermen
Det vises en melding når en kabel som støtter DP-alternativmodus er koblet til skjermen
under følgende forhold:
• Når Auto Select for USB-C (Automatisk valg for USB-C) er satt til Prompt for
Multiple Inputs.
• Når en DP-kabel er koblet til skjermen.
Dell UltraSharp 24/27 Monitor
Switch to USB-C Video Input:
No
Yes
U2421HE/U2721DE
Hvis USB-C Charging (USB-C-lading) er satt til Off During Power Off (Av i avslått
modus):
• Når du setter skjermelementer USB-C Prioritization (USB-C-prioritering) til High
Resolution (Høy oppløsning) i Skjerm-funksjonen, vises følgende melding:
Dell UltraSharp 27 Monitor
U2721DE
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
• Når du setter skjermelementer USB-C Prioritization (USB-C-prioritering) til High Data
Speed (Høy datahastighet) i Skjerm-funksjonen, vises følgende melding:
Dell UltraSharp 27 Monitor
U2721DE
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No