Users Guide

De monitor bedienen | 53
Als USB-C Charging (USB-C opladen) is ingesteld op On During Power Off (Aan
tijdens uitschakelen), wanneer u OSD-item van USB-C Prioritization (USB-C
Prioriteit) selecteren op High Resolution (Hoge Resolutie) of High Data Speed (Hoge
Gegevenssnelheid) in Schermfunctie, zal het volgende bericht verschijnen:
Dell UltraSharp 27 Monitor
U2721DE
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold key on USB Type-C input for 8 seconds.
Wanneer USB-C Charging (USB-C opladen) is ingesteld op Off During Power Off (Uit
tijdens uitschakelen) en USB-C Prioritization (USB-C prioritering) is ingesteld op High
Data Speed (Hoge gegevenssnelheid):
• Selecteer OSD-items van Fabrieksinstellingen terugzetten in Overige functie, het
volgende bericht zal verschijnen:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
• Selecteer OSD-items van Scherm resetten in Scherm functie, het volgende bericht zal
verschijnen:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?