Users Guide

52 | Betjening af skærmen
A message is displayed while the cable supporting DP alternate mode is connected to the
monitor under the following conditions:
• Hvis Auto Select for USB-C (Vælg automatisk på USB-C) sættes på Prompt for
Multiple Inputs (Spørg ved flere indgange).
• Hvis DP-kablet tilsluttes skærmen.
Dell UltraSharp 24/27 Monitor
Switch to USB-C Video Input:
No
Yes
U2421HE/U2721DE
Hvis USB-C Charging (USB-C-opladning) sættes på Off During Power Off (Fra, når
slukket):
• Hvis du sætter et af punkterne i USB-C Prioritization (Prioritering af USB-C) på High
Resolution (Høj opløsning) i Display (Visning), vises følgende besked:
Dell UltraSharp 27 Monitor
U2721DE
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
• Hvis du sætter et af punkterne i USB-C Prioritization (Prioritering af USB-C) på High
Data Speed (Høj datahastighed) i Display (Visning), vises følgende besked:
Dell UltraSharp 27 Monitor
U2721DE
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No