Users Guide

Rad s monitorom | 57
Kad je USB-C Charging (USB-C punjenje) postavljeno na On During Power Off
(Uključeno tijekom isključenog napajanja) i kad je USB-C Prioritization (Prioritizacija
USB-C) postavljena na High Data Speed (Visoka brzina podataka), odaberite stavke
zaslonskog izbornika Povrat na tvorničke postavke unutar značajke Ostalo, prikazat će se
sljedeća poruka:
Dell UltraSharp 24/27 Monitor
Are you sure you want to reset to default settings?
Yes No
U2421HE/U2721DE
Ako odaberete „Yes (Da)“ za vraćanje na zadane postavke, prikazat će se sljedeća poruka:
Dell UltraSharp 24/27 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U2421HE/U2721DE
When ‘Yes’ is select, power consumption may increase.
When ‘No’ is selected, it will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Ako odaberete „No (Ne)“, tada izvedite drugi Factory Reset (Povrat na tvorničke
postavke), prikazat će se sljedeća poruka:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Više informacija potražite u odjeljku Rješavanje problema .