Users Guide

Rad s monitorom | 53
Kada je USB-C prioritizacija postavljena na Visoka brzina podataka, odaberite OSD
stavke za Vrati na tvorničke postavke u značajci Ostalo, prikazat će se sljedeća poruka:
U2720Q U2720QM
Dell UltraSharp 27 Monitor
U2720Q
Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Are you sure you want to reset to default settings?
Yes
No
Dell UltraSharp 27 Monitor
U2720QM
Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Are you sure you want to reset to default settings?
Yes
No
Ako odaberete stavke zaslonskog izbornika Tvornički reset unutar opcije Ostalo -
Resetiraj ostalo, prikazat će se sljedeća poruka:
U2720Q U2720QM
Dell UltraSharp 27 Monitor
Are you sure you want to reset to default settings?
Yes No
U2720Q
Dell UltraSharp 27 Monitor
Are you sure you want to reset to default settings?
Yes No
U2720QM
Ako odaberete „Da“ za resetiranje zadanih postavki, prikazat će se sljedeća poruka:
U2720Q U2720QM
Dell UltraSharp 27 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U2720Q
When ‘Yes’ is select, power consumption may increase.
When ‘No’ is selected, it will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Dell UltraSharp 27 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U2720QM
When ‘Yes’ is select, power consumption may increase.
When ‘No’ is selected, it will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Više informacija potražite u Troubleshooting (Rješavanje problema).