Users Guide

Rad sa monitorom | 55
podešeno na High Data Speed (Visoka brzina prenosa podataka), kada izaberite stavke
prikaza na ekranu za Factory Reset (Ponovno postavljanje na fabričke vrednosti) u okviru
funkcije Other (Ostalo), pojaviće se sledeća poruka:
Dell UltraSharp 24/27 Monitor
Are you sure you want to reset to default settings?
Yes No
U2421HE/U2721DE
Kada izaberete „Da“ za ponovno postavljanje na podrazumevana podešavanja, pojaviće
se sledeća poruka:
Dell UltraSharp 24/27 Monitor
Easy Initial Setup:
Select ‘Yes’ to enable the following function(s):
• Always on USB -C Charging
Yes No
U2421HE/U2721DE
When ‘Yes’ is select, power consumption may increase.
When ‘No’ is selected, it will comply with ENERGY STAR requirements.
Individual settings can be changed in the Menu.
Kada izaberete „Ne“ , uradite drugi Factory Reset (Ponovno postavljanje na fabričke
vrednosti), pojaviće se sledeća poruka:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Pogledajte Rešavanje problema za više informacija.