Users Guide

Bruke skjermen | 53
Hvis USB-C Charging (USB-C-lading) er satt til På i avslått modus, og du velger
skjermmenyelement for USB-C Prioritization (USB-C-prioritering) til High Resolution
(Høy oppløsning) eller High Data Speed (Høy datahastighet) i Skjerm-funksjonen, vises
følgende melding:
Dell UltraSharp 27 Monitor
U2721DE
Dynamic switching of USB-C Prioritization is disabled when
Always On USB-C Charging is enabled.
To change USB-C Prioritization:
1. Shutdown the PC
2. Activate Input Source menu
3. Press and hold key on USB Type-C input for 8 seconds.
Når USB-C Charging (USB-C-lading) er satt til Off During Power Off (Av i avslått
modus) og USB-C Prioritization (USB-C-prioritering) er satt til High Data Speed (Høy
datahastighet):
• Når du velger skjermelementer for Fabrikktilbakestilling i Annet, vises følgende melding:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
• Når du velger skjermelementer for Skjermtilbakestilling i Skjerm-funksjonen, vises
følgende melding:
Dell UltraSharp 27 Monitor
U2721DE
Yes No
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before resetting:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?