Users Guide

Rad s monitorom | 55
Dok je kabel za DP izmjenični način rada priključen na monitor prikazuje se poruka u
sljedećim slučajevima:
• kad je Auto Select (Automatski odabir) za USB-C postavljen na Prompt for Multiple
Inputs (Upit za višestruke ulaze).
• Kad je na monitor priključen DP kabel.
Dell UltraSharp 24/27 Monitor
Switch to USB-C Video Input:
No
Yes
U2421HE/U2721DE
Ako je USB-C punjenje (USB-C Charging) postavljeno na Off During Power Off
(Isključeno tijekom isključenog napajanja) :
•Ako odaberete stavke zaslonskog izbornika USB-C Prioritization (Prioritizacija USB-C)
na High Resolution (Visoka razlučivost) u značajki zaslona, prikazat će se sljedeća
poruka:
Dell UltraSharp 27 Monitor
U2721DE
If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No
•Ako odaberete stavke zaslonskog izbornika USB-C Prioritization (Prioritizacija USB-C)
na High Data Speed (Visoka brzina podataka) u značajki zaslona, prikazat će se sljedeća
poruka:
Dell UltraSharp 27 Monitor
U2721DE
· If your PC is not DP 1.4, this option will result in reduced screen performance.
· If your PC is Dell Optiplex Ultra and powered from USB-C, you need to carry
out the following steps before switching option:
1. Select ‘ No’
2. Go to Monitor Menu: Set Personalize > USB-C Charging > On During Power O
Note: Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes No