Users Guide

48 | Operating the monitor
Icon Menu and
Submenus
Description
Input Source Use the Input Source menu to select between different
video inputs that are connected to your monitor.
USB-C
90 W
Select USB-C 90 W input when you are using the
USB-C 90 W connector. Press the joystick button to
confirm the selection.
DP Select DP input when you are using the DP (DisplayPort)
connector. Press the joystick button to confirm the
selection.
HDMI Select the HDMI input when you are using the HDMI
connector. Press the joystick button to confirm the
selection.
Auto Select Turn on the function to allow the monitor to automatically
scan for available input sources. Press the joystick button to
confirm the selection.
Auto Select
for USB-C
Allows you to set Auto Select for USB Type-C to:
• Prompt for Multiple Inputs: always show Switch to
USB Type-C Video Input message for user to choose
whether to switch or not.
• Yes: The monitor always switch to USB Type-C video
without asking while USB Type-C connected.
• No: The monitor will NOT auto switch to USB Type-C
video from another available input.
Rename Inputs Allows you to Rename Inputs.
Reset Input
Source
Resets all settings under the Input Source menu to the
factory defaults.