White Papers

DWORD=0 - Image was not present on last run.
Image store path in which the last image was copied. This value will not exist if no images are captured.
"LastImagePath"=string
Timestamp of the last copied image.
"LastCopyTimeStamp"=string
This private key verifies the images in the store.
"PrivateKeyBlob"=string
Note: End users should not modify this entry as it will prevent the product from functioning properly.
A public key used to verify the images in the store.
"PublicKeyBlob"=string
Note: End users should not modify this entry as it will prevent the product from functioning properly.
BIOS Attributes Polling Interval
This entry configures the time period in seconds between BIOS attribute sweeps.
HKLM\SOFTWARE\Dell\TrustedDevice\
DWORD=SecondsBetweenAttributeSweeps
Minimum value in seconds = 3600 (1 hour)
Maximum value = 172800 (48 hours)
Default = every 12 hours
Value (in decimal) = 3600 - sweeps occur every hour
Value (in decimal) = 172800 - sweeps occur every 48 hours
This entry changes the delay in milliseconds between each individual BIOS attribute retrieval.
HKLM\SOFTWARE\Dell\TrustedDevice\
DWORD=MSBetweenAttributeReads
Minimum value in milliseconds = 500
Maximum value in milliseconds = 2000
Default = every 500 milliseconds
Value (in decimal) = 500 - reads a different BIOS attribute every 500 milliseconds
Value (in decimal) = 2000 - reads a different BIOS attribute every 2000 milliseconds
Security Risk Protection Score
This entry disables Security Risk Protection Score.
HKLM\SOFTWARE\Dell\TrustedDevice\
DWORD=SecurityScore
Default = 1 (enabled)
Value = 1 - enabled
Value = 0 - disabled
Note: If Security Risk Protection Score is disabled in the Registry, component assessments are not run and no score is
generated.
Troubleshooting
If BIOS results are unavailable, browser-based results do not display. See the following table for error codes.
Results, Troubleshooting, and Remediation
29