User`s guide
Table Of Contents
- Install the iSCSI Initiator Software (iSCSI-attached Host Servers Only)
- Perform Target Discovery from the iSCSI Initiator
- Configure CHAP Authentication on the Host Server (optional)
- Connect to the TL2000/TL4000 from the Host Server
- Guidelines for Configuring Your Network for iSCSI
- Reference information
Page 2
Connect to the TL2000/TL4000 from the Host Server ................................................................ 9
If you are using Windows Server 2008 Core Version .............................................................. 9
If you are using a Linux Server ..............................................................................................10
Guidelines for Configuring Your Network for iSCSI ...................................................................10
Linux Host Setup ...................................................................................................................12
Avoiding duplicate iSCSI devices discovered by RH5 ........................................................12
Avoiding duplicate iSCSI devices discovered by RH4 .......................................................13
Viewing the status of your iSCSI connections ........................................................................13
Performing Hardware Maintenance with your iSCSI solution .................................................13
Reference information ...............................................................................................................15
Terminology...........................................................................................................................15
Understanding CHAP Authentication .....................................................................................15
Using iSNS ............................................................................................................................15