Administrator Guide

60 | Connections
The Local Resources Section
 Sound Redirection Options -By default, sound from the server will
redirect to the local thin client. If you do not want sound to be sent to the
local device, then select either the Do not play sound or Lea ve sound
on the remote thin client radio buttons below Redirect sound to local
device (selected by default).
 Enable Printer Redirection -Mark this checkbox to redirect printing to a
printer attached the local terminal.
 Enable Client Drive Mapping -Allows the user plug USB Flash Drives
locally into the terminal and access the contents of the drive via the RDP
session.
 Enable Com Port Mapping -Redirects serial devices on your terminal to
the server.
 Enable Smartcard Support- Specifies whether redirection of Smart
Cards is permitted during server authentication.
NOTE: To correctly set up Printing, make sure you have also entered fields in the Printer
Name and Driver Name fields in the Control Panel . This can be found in the Printer
section, under System Settings .