Administrator Guide

Advanced Options | 41
4. A file named detosConfig .tar will now exist on the flash drive. This file
contains important diagnostic information that can be analyzed by Dell
Support and will help troubleshoot and solve issues you may be
experiencing.
ELO Touch Screen Support
Upon connecting an ELO Touch Screen to your thin client you will be presented
with a calibration screen on first boot to ensure your unit functions properly.
There are two ways to calibrate your ELO Touch Screen device when attached
to your thin client.
Calibration – Option 1
Upon first boot of the operating system, you will see a gray calibration screen
with a countdown timer in the middle if an ELO device is found.
1 Use your finger or a stylus to tap the center of the red cross that displays
in the upper left-hand corner. Try to get as close as possible to the small
circle in the center of the red cross.
Another calibration spot will appear in the top right-hand corner. Use your
finger or a stylus to tap the center of the red cross. Repeat for the
calibration spots that appear in the bottom right-hand corner of the screen,
and then the bottom left-hand corner of the screen.