Administrator Guide

26 | System Settings
Alternatively, you can now access the connections available to you by utilizing
the Network tray icon. To connect using the tray icon:
1 Right click on the Network tray icon in the lower left corner of the
desktop.
2 Select the network desired from the list of available networks that is
displayed.
3 Enter your password into the Password field in the popup that appears.
4 Click OK to connect.
If you need to set a Static IP address on a DeTOS thin client:
1 From the DeTOS Desktop, select DeTOS  Control Panel .
2 Select the Network icon on the left-hand side of the Control Panel under
System .
3 Expand the IP Configuration section of the Network Settings menu.
4 Deselect the Use DHCP checkbox.
5 Type in appropriate values for the IP Address, Netmask, and Gateway
address fields and then press Apply .
6 Sometimes, depending on your network, it may take 15-20 seconds to
reconfigure to the Static IP. This is normal, and a reboot is NOT required.