Administrator Guide

System Settings | 25
4 Enter a password in the password field and re-enter it to confirm your
password.
5 Press the Apply button to save your password.
NOTE: Once a system password is set, the user will be prompted for the password when
they attempt to open the Control Panel . If the Cancel button is pressed or a user
incorrectly types the password, then the Control Panel will open in a read-only mode. A
small padlock icon will also appear along the bottom of the Control Panel window,
indicating that edits are not allowed. Keep your password safe!
Network
By default, the thin client attempts to contact a DHCP server on your network
during bootup. If you have a DHCP server on your network, then the thin client
will acquire an IP address automatically and no further network configuration is
required on your part. However, there are additional options available.
Thin clients capable of connecting to wireless networks will still default to a
wired connection if available. To change the network for your connection:
1 From the DeTOS Desktop, select DeTOS  Control Panel .
2 Select the Network icon on the left-hand side of the Control Panel under
System .
3 Select the desired connection from the Networks dropdown menu in the
Networks section.
4 Click Apply .
If you’ve selected a wireless network, a Wireless Network section will appear
beneath the Networks section. To further configure a wireless connection:
1 Select the authentication method used on your network from the
Authentication dropdown menu
2 Depending on the authentication method selected, you may have to enter
additional information into the fields that appear.
3 When all the required fields have been filled, click Apply .