Administration Manual

44 | Terminal Management

After completion, the newly cloned disk image can be seen in the

inventory table of the

Disk Images

tab.

Applying a Disk Image to a Terminal

NOTE:

When applying disk images to your terminals, be sure you are using the correct

image for that particular model, otherwise you may render that terminal unbootable.

Should a terminal become unbootable, a re-imaging guide can be found at

support.dell.com/support.

From the

Terminals

inventory table, left-click to select a terminal and

then right-click to open the

Context Menu

. Select

Disk Image



Apply

to Terminal

. To re-image more than one terminal at a time, hold down

the <Ctrl> key while selecting other terminals, or use the <Shift> key to

select a range of terminals.

From the

Disk Image Name

dropdown list on the

Select Disk Images

pane, select the image file you want to apply.

NOTE:

Using the search function while performing disk image applications is advised.

For example, by searching for “FX170 DeTOS” will cause only FX170 terminals running

DeTOS to be displayed. By utilizing the search function, administrators can avoid

accidentally applying a disk image to a terminal of the wrong type or that is running a

different OS.