Administrator Guide

Installing or Removing Peripherals | 33

Installing a Scanner or Camera

Power the scanner or camera on and plug the USB cord into the photo device

and into the terminal. Depending on the model, your device may install

automatically.

If the device is not Plug and Play ready, you may have to install the drivers

manually. You can insert a USB flash drive or a CD on an external drive that

contains the device's drivers into the terminal. If you do not have the drivers

available on a media device, search the manufacturer’s website and download

the correct driver that is compatible with your scanner or camera model and the

operating system.

Connect your scanner or camera to the terminal using a USB cord.

Your operating system should recognize the new hardware. If not,

select

Start→Control Panel→Add Hardware

. A wizard will guide

you through the installation process.

NOTE:

If the device comes with its installation files on a CD, there are ways

you can install them onto your terminal. The easiest way is to use a Plug and

Play CD-ROM. Another way is to use a second thin client and copy the entire

installation folder from the CD onto a USB storage device. You can then use

this USB device in the terminal. Also, you can search the manufacturer's

website for the correct drivers for your device.