Administrator Guide

Using Your Thin Client | 15
Installing Additional Software
You may install third party licensed software as long as there is adequate space
on the flash media.
To install additional software applications:
1 Log-in as an Administrator. Click Start→All Programs→FBWFGUI .
2 Temporarily disable the write filter by clicking the Disable FBWF
button, and press the Apply button.
3 Reboot the terminal.
4 Log-in again as Administrator and install the new software.
5 After installation, verify the application is working as expected.
6 Launch the FBWF Manager and click the Enable FBWF button. Also,
make sure to re-enable the Basic Exclusions. For default exclusions,
this would mean selecting the buttons for Enabled Documents and
Settings for Everyone and the Enabled Persistent Registry buttons.
7 Click Apply and Reboot the terminal.