Owner`s manual

Removing the Memory
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. left cover
b. optical drive
c. memory shroud
3. Press down on the memory-securing clips on each side of the memory module, and lift the memory
module upwards to remove it from the computer.
NOTE: Tilting of DIMM during removal can cause damage to the DIMM.
Installing the Memory
1. Insert the memory module into the memory socket.
2. Press down on the memory module until the securing clips secure the memory in place.
NOTE: Tilting of DIMM during insertion can cause damage to the DIMM.
3. Install:
a. memory shroud
b. optical drive
c. left cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. left cover
b. PCIe card
3. Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the
coin-cell battery out of the computer.
25