Setup Guide

Next Generation KeySecure (k170v)
48 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
4.6 Configure the Key Management Server (KMS) settings on iDRAC
1. Enter or select data in the fields, and then click Apply.
Configure KMS on iDRAC
Note—The User ID and Password fields (if applicable) must match the user you’ve created on the Next
Generation KeySecure in the steps above.
2. Go to the Job Queue page and ensure that the job ID is marked as successfully completed.
3. If you see any job status failures, view Lifecycle Logs for more information about the failure.
Create job to Configure KMS on iDRAC
4. Go to the Job Queue to check the job status.
Check the status of job for creating a job to Configure KMS on iDRAC
The iDRAC SEKM configuration is completed.