Setup Guide

Next Generation KeySecure (k170v)
36 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
4.2.2 Configure KMIP Interface
1. Click CA  Create CSR.
The save csr and save private key buttons are enabled.
Create CSR on Thales
Note—By default, the Local Certificate Authority shown in the image is available.
2. Enter or select the settings in the Create CSR section.
Enter setting to create CSR on Thales
Note—If you have used an older version of Gemalto (KeySecure 150v), the “Subject Alternative Name”
field has been split into two separate fields—DNS Names and IP addresses.