Administrator Guide

11 PowerEdge MX7000 Server Configuration using OME Modular
- What are the possible states for Virtual Identities (MAC/WWNs) in Identity
Pools?
o Available: Indicates that the virtual identity value is not being used by any
device.
o Reserved: Indicates that the virtual identity value is reserved for
deployment to a target device. Once OpenManage Enterprise Modular
deploys the identity to the target device, and confirms that it was
successfully applied on the device, it will change its state to Assigned.
o Assigned: Indicates that the virtual identity value was deployed to a target
device and OpenManage Enterprise Modular confirmed that the value was
successfully applied on that device.
- How do I create auto-generated virtual identities (MAC/WWNs) when
defining the Identity Pools?
Please refer to Section 3: Identity Pools in OpenManage Enterprise in
“https://downloads.dell.com/manuals/all-
products/esuprt_software/esuprt_ent_sys_mgmt/dell-openmanage-enterprise-
v32_white-papers5_en-us.pdf
What messages are logged in iDRAC and OME-M related to enabling and
assignment of virtual identities (MAC/WWNs)?
MessageID
Severity
Message
Recommended Action
IOID001
The Input/Output Identity (I/O
Identity) optimization feature is
enabled.
None.
IOID002
The Input/Output Identity (I/O
Identity) optimization feature is
disabled.
None.
IOID003
The Virtual Address Persistence
Policy setting for Auxiliary powered
devices is changed to <restart
type>.
None.
IOID004
Virtual Address Persistence Policy
setting for Non-Auxiliary powered
devices is changed to <restart
type>.
None.
IOID110
The virtual address of <controller>
Port <port> is configured.
None.
IOID111
Unable to configure the virtual
address of <controller> Port
<port>.
Verify that the network port is
enabled and that the port has
Virtual Addressing capability
and then retry the operation.