Administrator Guide

Troubleshooting
24 Using Server Configuration Profiles to Deploy Operating Systems to Dell EMC PowerEdge Servers | 375
Message=[SYS067: Unable to complete application of configuration profile
values.]
Percent Complete=[100]
----------------------------------------------------------
To get more information on why the job failed, execute the following command:
racadm lclog viewconfigresult -j JID_xxxxx
SeqNumber = 148
FQDD = LifecycleController.Embedded.1
Job Name = Import Configuration
DisplayValue = OS Media Share IP Address
Name = OSD.1#OSMediaShareIP
OldValue = ""
NewValue = 10.36.99.99
Status = Failure
MessageID = OSD16
ErrCode = 10366
This shows which value is causing the error. Double check the network share connection info and credentials
and retry the command.
4.3 Corrupt operating system installation file
If the operating system installation file, the ISO file for example, is corrupt, three jobs will be created and
completed successfully just as they would be if the installation file is good:
racadm jobqueue view
-------------------------JOB QUEUE------------------------
[Job ID=JID_783469298257]
Job Name=Configure: Import Server Configuration Profile
Status=Completed
Start Time=[Not Applicable]
Expiration Time=[Not Applicable]
Message=[SYS053: Successfully imported and applied Server Configuration
Profile.]
Percent Complete=[100]
----------------------------------------------------------
[Job ID=JID_783469403822]
Job Name=OSD: UnpackAndAttach
Status=Completed
Start Time=[Not Applicable]
Expiration Time=[Not Applicable]
Message=[OSD1: The command was successful.]
Percent Complete=[100]
----------------------------------------------------------
[Job ID=JID_783469655226]
Job Name=OSD: BootTONetworkISO
Status=Completed
Start Time=[Not Applicable]
Expiration Time=[Not Applicable]
Message=[OSD1: The command was successful.]
Percent Complete=[100]