Administrator Guide

Technical support and resources
5 Telemetry Streaming with iDRAC9 – Storage Reports | ID 430
1 Introduction
Telemetry Storage reports are helpful to assess the health and state of the various drives on the server and
becomes necessary as the number of drives increase on the server. One key set of metric reports are the
Storage reports. Storage reports provide data for both SSD Smart drives as well as NVMe SMART drives.
This data can be used to assess the health and state of the drives on the server. Three telemetry storage
reports are available to get the details of the drives.
• Storage SMART disk data (StorageDiskSMARTData)
• NVMe SMART data (NVMeSMARTData)
• Storage Sensor (StorageSensor
1.1 Prerequisites
• The Telemetry feature is available on iDRAC9 firmware version 4.00.00.00 or above and requires a
Datacenter license.