Setup Guide

Server Configuration Profiles: User’s Guide
64 Server Configuration Profiles: Reference Guide | 456
racadm>>lclog viewconfigresult -j JID_035451979234
SeqNumber = 8304
Job Name = Import Configuration
Message ID = SYS064
Message = Input file for import configuration is invalid at line 2911
If the line number is unclear, then it’s recommended to run the template through an external XML or JSON
validator to check for errors.
19.3.2 SYS051 – Unable to shut down in time
SYS051 - The system could not be shut down within the specified time.
The operating system can potentially deny or ignore the graceful shutdown request
. If the SCP Import
operation times out this error, then consider the following options:
• Increase the optional ‘Time to Wait’ parameter.
• Use the Forced shutdown option.
• Power down the host manually.
19.3.3 SYS055 – Completed with Errors
SYS055 - Import of Server Configuration Profile operation completed with errors.
SCP Import operations use a ‘continue on error’ policy. Detected errors will be reported to the LCL but the job
will continue to apply all settings. SCP Import has intelligent attribute dependency resolution and multiple
layers of retries to resolve all possible conflicts. However, any unresolved errors will be logged to the LCL.
The majority of issues will be reported in the configuration results. This includes schema validation issues
and dependency issues SCP Import was unable to resolve.
If the operation Completed with Errors and the reason is unclear from the configuration results, then it’s
recommended to review the iDRAC Lifecycle Logs
for more information.
racadm>>jobqueue view -i JID_041519610631
---------------------------- JOB -------------------------
[Job ID=JID_041519610631]
Job Name=Configure: Import Server Configuration Profile
Status=Completed with Errors
Scheduled Start Time=[Not Applicable]
Expiration Time=[Not Applicable]
Actual Start Time=[Sat, 31 Oct 2020 08:46:01]
Actual Completion Time=[Sat, 31 Oct 2020 08:46:04]
Message=[SYS055: Import of Server Configuration Profile operation completed with errors.]
Percent Complete=[100]
----------------------------------------------------------
racadm>>lclog viewconfigresult -j JID_041519610631
SeqNumber = 10430
FQDD = LifecycleController.Embedded.1
Job Name = Import Configuration
Operation Name = CHANGE
DisplayValue = BIOS Reset To Defaults Requested
Name = LCAttributes.1#BIOSRTDRequested