White Papers

30 Zero-touch, bare-metal server provisioning using the Dell EMC iDRAC with Lifecycle Controller Auto Config
6 Configuring Windows and Linux DHCP servers to support
Auto Config
 Configuring Windows DHCP server option 43
 Configuring Windows DHCP server option 60
 Configuring Linux DHCP server
The following server “roles” are required:
 DHCP server
 File server (must support CIFS or NFS file sharing)
6.1 Configuring Windows DHCP server option 43
1. On the DHCP server, click Start Administration Tools  DHCP. The DHCP server administration tool is started.
2. Find the server and expand all the items in the tree diagram.
3. Right-click Scope Options and select Configure Options.
4. In the Scope Options dialog box, select the 043 Vendor Specific Info check box.
5. In the ASCII column, enter the IP address of the server where the Server Configuration Profile file is hosted. The value you enter is
also displayed in the Binary column.
Windows DHCP scope options
6. Click OK to save the configuration.