Manualshelf

White Papers

ManualsBrandsDell ManualsConverged InfrastructureSystems Management Solution Resources
567891011121314
Technical support and resources
12 Understanding Quick Sync 2 for Dell EMC PowerEdge 14th Gen Servers and MX7000 Chassis
1. Press the Quick Sync 2 activation button on the front of the server. If Quick Sync 2 access is enabled,
the Activation Button LED will turn on and display a solid color.
2. Scan for Quick Sync 2 systems within OMM:
a. On the Mobile device (Android or IOS) start the OpenManage Mobile App.
b. Press the Add System button.
c. Select Quick Sync 2 from the Connection Method screen and begin scanning the servers.
Note—Make sure that Bluetooth is enabled on the mobile device. If not then OMM prompts you to enable
Bluetooth.
3. The list of nearby active Quick Sync 2 servers is displayed. Select the server from the list.
A security check will occur.
4. On the Verify Certificate screen, accept the certificate.
If Quick Sync 2 Read Authentication is enabled, the authentication check will occur.
5. Either scan the QR code from the server information tag, or enter credentials manually.
After the credentials are accepted, the iDRAC home page is shown. OMM can be used to interact
with the iDRAC.
Getting started with Quick Sync 2 for MX7000 Chassis
This procedure is applicable only when you are adding the chassis for the first time.
1. Press the Quick Sync 2 activation button on the LCD of the chassis. The LCD will display the Quick
Sync 2 screen, indicating that the chassis is broadcasting.
2. Scan for Quick Sync 2 systems within OMM:
a. On the Mobile device (Android or IOS) start the OpenManage Mobile App.
b. Press the Add Chassis button.
Note—Make sure that Bluetooth is enabled on the mobile device. If not then OMM prompts you to enable
Bluetooth.
3. The list of nearby active Quick Sync 2 chassis is displayed. Select the chassis from the list.
A security check will occur.
4. On the Verify Certificate screen, accept the certificate.
If Quick Sync 2 Read Authentication is enabled, the authentication check will occur.
5. Either scan the QR code on the LCD of the chassis, or enter credentials manually.
After the credentials are accepted, the MX7000 Chassis home page is shown. OMM can be used to
interact with the chassis and its subcomponents.