User's Manual

Reusing Configuration Files

In this scenario, you can import and reuse a configuration file that you created and exported in an earlier

session. You can use this configuration file and create multiple ISO images with slightly different

configurations. This configuration can be used for the current system or for multiple systems. However,

you need to create separate ISO images for every variation of the multiple systems deployment. For the

current system, you can directly apply the configuration you imported, with slight modifications, if

required.

NOTE: The GUI fields are populated when you import the configuration file. You can edit the

modules, as required. If you make any changes on the System(s) Selection screen all existing

configuration for the three modules are reset.

1. On the Systems Build and Update Utility Home screen, click Import Saved Configuration.

The Import Configuration screen is displayed.

2. Specify the location from where you want to import the configuration file and click Continue.

The progress screen is displayed, followed by the Imported Configuration File Details screen.

3. Click Systems Build and Update Utility Home.

4. Edit the existing configuration for the Firmware Update, Hardware Configuration, and Server

Operating System Installation modules, if required.

5. Create the ISO image for this configuration.

For more information, see Creating An ISO image.