User's Manual

1. Update your system firmware, if required.

See Firmware Update Module.

2. Configure your system hardware and make sure you click Save Settings before you navigate away

from a component screen.

See Hardware Configuration Module.

NOTE: Ensure that you configure Redundant Array of Independent Disks (RAID) to proceed

beyond the Configure RAID screen in the Configure Server Operating System Installation

module.

3. Click Configure against Server OS Installation on the Systems Build and Update Utility Home or

click Server OS Installation on the left pane.

See Server Operating System Installation Module.

You can view, edit, or reset the configuration for the module(s) by clicking View, Edit, or Reset,

respectively.

4. On the Systems Build and Update Utility Home, click Apply/Export Configuration.

The Configure Apply/Export Options screen is displayed.